With your OK, HeyCatch and PostHog use cookies to see how you use the site, and link it to your account if you sign in. Cookie Policy

What we collect

With your OK, our analytics providers HeyCatch and PostHog use cookies on our website and sign-in pages to see which pages you visit and where you came from, what you click, your browser and device, and your IP address (for rough location). If you then sign in, we link this to your account, along with a few milestones in the app, such as finishing setup, your first pantry item or recipe, and starting or ending a subscription. These analytics stay off on these pages unless you allow them.

How much resin does my mold need?

Hi, I'm Ellie. One of the most common questions I get is "how much resin do I mix?" Mix too little and you're racing to stir a second batch while the first one starts to set. Mix too much and you've poured money into the bin. Here's how I work it out.

Measure the cavity

Measure the inside of the mold, the space the resin will fill, not the outside of the silicone.

  • For a round cavity, it’s π × radius² × depth.
  • For a box, it’s width × height × depth.

Measure in millimetres and divide the result by 1,000 to get millilitres. If your mold has several cavities, work out one and multiply by how many there are.

Odd shapes: let water measure it

Hearts, skulls, crystals and anything with curves won't fit a tidy formula. For those, let the mold measure itself:

  • Water. Fill the cavity to the line you'd pour resin to, then tip the water into a measuring jug. Or set the mold on your scale first, tare it, and fill it there: water's weight in grams reads almost exactly as its volume in millilitres.
  • Oil. For a mold you'd rather not get wet, or one where water beads and won't settle into fine detail, a light oil works the same way in a measuring jug. Read it by volume rather than weight, because oil is lighter than water.

Either way, dry and clean the mold completely before you pour. Water left in the cavity clouds resin, and an oily film can leave a soft or patchy surface, so wash an oiled mold with warm soapy water and let it dry before it sees resin.

Split Part A and Part B

Resin only cures properly when Part A and Part B meet at the right ratio. Each resin has its own mix ratio, and some are measured by volume while others are measured by weight. Read the ratio and the basis off your bottle; the numbers from a different brand won't carry over. Mixed at the wrong ratio, resin may never fully cure.

Let me do it for you

Save your molds on your shelf in the app with their measurements, and when you plan a piece I'll work out the volume, split it into Part A and Part B for the resin you have, and put the amounts right into the steps.